|
STAGE 1 |
LHD MIG welded round and square tube spaceframe chassis,
Fully bracketed to accept Chevrolet V8 engine with
Porsche transaxle, steering, fuel tanks, seat belts, pedals, radiator,
handbrake, gear linkage and brake servo mountings.
All powder coated in black satin finish. | $5162.00 |
|
STAGE 2 |
Alloy panel kit in NS4 16swg aluminium sheet polythene
coated both sides for cockpit floor, sides and bulkheads,
pre-cut and bent including bonding adhesive, pop rivets
and skin pins. | $432.00 |
|
STAGE 3 |
Lightweight fabricated TIG welded brake, clutch and throttle
pedal set, with adjustable foot pads. Including all bearings
fixing bolts nuts and washers. | $342.00 |
|
|
Brake and clutch master cylinders, remote fluid reservoir
with float level, adjustable brake bias bar,
clutch clevis with all fixing nuts and washers. | $377.00 |
|
STAGE 4 |
TIG welded wishbone set with urethane bushes and plated
fixing nuts bolts and washers. | $959.00 |
|
|
Front suspension upper and lower ball joints. | $148.00 |
|
STAGE 5 |
Rear uprights in LM25 heat treated alloy, fully machined
to accept Ford manufactured hubs, bearings and brakes.
Including all plated fixing bolts, nuts and washers. | $850.00 |
|
|
Rear toe in adjusters including rose joints and fixing bolts. | $226.00 |
|
|
Front uprights in LM25 heat treated alloy, fully machined
to accept Ford manufactured hubs, bearings and brakes.
Including steel steering arms. | $850.00 |
|
STAGE 6 |
Front set of wheel hubs, wheel bearings, oil seals,
dust caps, hub nuts, washers and long wheel studs. | $418.00 |
|
|
Rear set ditto. | $657.00 |
|
|
Front set of 260mm vented disc brakes, callipers and pads.
(see accessories for other options) | $629.00 |
|
|
Rear set of 260mm solid disc brakes, callipers and pads.
(see accessories for other options) | $456.00 |
|
|
Handbrake lever, fixing bolts and pair of cables. | $173.00 |
|
STAGE 7 |
Brake line kit in stainless steel pressure tested flexible pipe
with all fixing clips, washers and brake light switch. | $338.00 |
|
STAGE 8 |
Steering column complete with universal joints, bearings
and fixing bolts. | $381.00 |
|
|
Sports alloy steering rack with 2.5 turns lock to lock complete
with track rods, track rod ends, alloy mounting clamps,
fixing bolts and rack boot kit. | $860.00 |
|
STAGE 9 |
Front mounted radiator and cooling kit comprising of five row
radiator, preformed alloy water pipes, twin fans with water
temperature sensor thermostat, alloy expansion tank,
alloy swirl pot and all fixing brackets. | $1295.00 |
|
STAGE 10 |
G50 gear linkage in 20mm CDS including all needle roller universal
joints and chassis fixing rose joints. All plated.
Gear lever 1/2" rod. | $643.00 |
|
|
Centre shift. Extra: | $264.00 |
|
STAGE 11 |
Foam filled alloy petrol tank with - 6 fittings, fixing kit, tube
type fuel gauge sender unit, aircraft type external flush filler
cap, alloy mounting, filler hose and clips. 40 litre capacity. | $814.00 |
|
STAGE 12 |
Set of standard front and rear dampers with height and bump
adjustment. Coil spring poundage to suit proposed finished
weight of car including all fixing nuts bolts and washers. | $765.00 |
|
STAGE 13 |
Drive shaft pair with lobro universal joints and fixing bolts
Purpose made from high grade steel. | $1163.00 |
|
STAGE 14 |
Wiring loom complete with fuse box, relay sockets and
multi connectors for separate front and rear looms. | $508.00 |
|
STAGE 15 |
GTR bodywork in GRP with Isophthalic high heat
distortion resin comprising front and rear sections, side pods,
cockpit, doors, dashboard, headlight and instrument pods.
All in coloured gelcoat. | $7341.00 |
|
STAGE 16 |
Front and rear body hinges, door locks, door hinges, gas struts,
body securing latches and releases. | $906.00 |
|
STAGE 17 |
GTR laminated glass windscreen, polycarbonate sidescreens,
GTR perspex headlight covers. | $998.00 |
|
|
TOTAL | $27955.00 |
CHASSIS PARTS | |
Full welded roll cage. | $1622.00 |
Alloy double skin kit for cockpit floor,radiator and rear bulkhead. | $333.00 |
Set of up-rated urethane suspension bushes with s/s sleeves. | $229.00 |
Set of four top quality shockers fully adjustable for ride
height and bump complete with race quality road springs. | $1988.00 |
Gas strut kit for rear canopy. | $104.00 |
| |
BODY | |
Remove and buff up all flash lines, cut out all apertures for lights,
trim all returns to correct size. | $987.00 |
GT spec mid mounted rear wing in carbon fibre with adjustable flap
and carbon fibre skinned alloy honeycomb end plates. | $2908.00 |
Set of body grills in black anodised expanded alloy. | $335.00 |
Ultima electric door mirrors pair. | $518.00 |
Sealed side luggage containers in 16g NS4 alloy pair. | $247.00 |
Luggage container covers in carbon fibre covered alloy honeycomb. | $212.00 |
Side window helicopter vents pair. | $33.00 |
| |
BRAKES | |
Twin brake servos kit for 260mm standard brakes. | $619.00 |
| |
Set of four 12.7" vented disc brake and callipers comprising X drilled
-320mm x 30mm AP Racing curved vane vented discs with alloy bells
and AP Racing four pot callipers (1.5" & 1.625" pistons with double seal)
with Mintex 1166 pads. Complete with billet fixing kit, all bolts and
AP brake fluid. | $4009.00 |
Pair of separate handbrake callipers for above with all
fixing brackets, bolts etc. | $485.00 |
| |
ENGINE BAY | |
Twin fuel pump kit with stainless steel hose and all connections - | |
To suit Holley carb engines up to 375 bhp. | $458.00 |
To suit Holley carb engines up to 720 bhp. | $844.00 |
Petrol tank link in stainless hose. | $79.00 |
Braided stainless steel clutch pipe and fittings. | $115.00 |
Accelerator cable kit with fixing brackets. | $65.00 |
Exhaust system for small block Chevrolet TIG welded in stainless steel
comprising of 4 into 1 headers of 1.75" dia. with 3" collectors
and 3" tail pipes oval silencers with fitting kit. | $3104.00 |
Oil cooler kit comprising 25 row cooler, sandwich plate, pipework
in -10 stainless braided pipe with alloy fittings. | $546.00 |
Accusump 6 pint capacity oil reserve electric valve, all fittings
braided stainless hose and alloy fittings in conjunction with
oil cooler. | $973.00 |
G50 transaxles- used from. | $2908.00 |
Getrag transaxles 6 speed - used from. | $4000.00 |
Transaxle invert kit comprising mountings and breather kit. | $345.00 |
Engine/transaxle adapter - Chevy/Porsche. Including flywheel to fit small block
Chevy to a G50, needle roller spigot bearing and alloy housing. | $846.00 |
Engine/transaxle adapter - Chevy/Getrag. Including flywheel to fit small block
Chevy to a Getrag, needle roller spigot bearing and alloy housing. | $1119.00 |
Clutch kit for G50 comprising cover, plate, thrust bearing and all bolts. | $872.00 |
Clutch kit for Getrag comprising cover, plate, thrust bearing and all bolts. | $696.00 |
Porsche starter ring gear. | $167.00 |
Starter motors gear reduction type. | $560.00 |
Speedo sensor. | $167.00 |
Extra fuel tank complete. | $814.00 |
Aluminium glass cloth canopy protection. | $115.00 |
Silicon radiator and engine bay coolant hose kit. | $217.00 |
| |
COCKPIT | |
Steering wheel 320mm leather road. | $173.00 |
Steering wheel boss with deformable structure. | $67.00 |
Solid alloy gear knob (G50 rod linkage). | $38.00 |
Gear change mechanism for Getrag transaxle including cables, actuator,
Brackets, mounting plates, gear knob 6 speed with gaiter, GRP trim covers. | $1117.00 |
Ultima seats are designed specifically to fit the Ultima with a minimum of
padding with the best of support and comfort whilst maintaining the
maximum use of space in the cockpit. | |
Ultima seats - pair. | $635.00 |
Ultima seats cloth covered. | $934.00 |
Ultima seats Alcontara covered - pair. | $1276.00 |
Ultima seats leather covered - pair. | $1392.00 |
Lumbar support (pneumatic) - pair. | $148.00 |
Seat runners pair. | $99.00 |
Seat belts four point fixing with snap release pair. | $173.00 |
Seat belts six point fixing with twist buckle release 50mm wide pair
manufactured specifically for Ultima. | $458.00 |
Heater kit with all hoses valves and brackets. | $377.00 |
Air conditioning kit including integral heater, compressor with
mounting bracket to suit small block Chevy, condenser, drier, all mounting
brackets, switches and swaged hoses. | $2312.00 |
| |
ELECTRICS | |
Rear lights, Indicators, brake lights, side repeaters, rear fog and
number plate lights. | $538.00 |
Triple headlight kit. | $737.00 |
Relays and fuses. | $137.00 |
Switches (rocker type). | $122.00 |
Pantograph wiper and washer kit. | $427.00 |
Battery cable kit with main cable and two earth straps. | $81.00 |
Battery race quality sealed. | $150.00 |
Battery fixing clamp. | $32.00 |
Instruments Ultima type, white faces. 200mph speedo, 7000rpm
tacho, oil pressure, water temperature, volt meter, gas gauge. | $1013.00 |
Headlamp flash relay. | $62.00 |
Horn. | $18.00 |
High level brake light. | $44.00 |
| |
WHEELS | |
13" x 18" & 9" x 18" split rim set in polished alloy with billet centres. | $3514.00 |
All the above include sleeve nuts. | |
| |
TYRES | |
335/30/ZR/18 tyres pair. | $1180.00 |
245/35/ZR/18 tyres pair. | $696.00 |
| |
ALL THE ABOVE PRICES ARE EX WORKS | |